Συμβουλέψου τους ειδικούς.
Κάλεσε τώρα στο 210 3304544
1815€
Κωδικός Προϊόντος: 10434
The ELB 500 TTL Dual To Go Kit was put together by the esteemed lighting manufacturer Elinchrom for photographers who require a small form factor, light weight, and superlative performance backed by the convenience of TTL exposure control. The kit includes a 500Ws ELB500 TTL pack with a lithium-ion battery, charger, and sync cord. Two ELB 500 flash heads with 8' cables, a 7" Q-Reflector, a wide reflector, Snappy Carrying Bag with shoulder strap, and a sturdy, nylon ProTec Location Bag with protective rain cover are also included.
Elinchrom steps into the TTL arena with the introduction of the ELB 500 TTL battery-powered pack. Measuring 6.4 x 7.12 x 3.6" and weighing just 5.5 lb with its separately sold battery, the ELB 500 is ideal for the traveling or location photographer shooting fashion, portraits, or editorial work. Using an optional Elinchrom Skyport Pro or the Phottix Odin II transmitter, the ELB 500 TTL greatly reduces setup delays, shortening the time between inspiration and execution by using your camera's flash exposure system. With asymmetrical power distribution over 7 stops to 2 ELB flash heads, photographers can make TTL power adjustments at distances from 328 to 656' depending on the transmitter they use. There's also a Manual Lock mode that allows you to get a TTL initial exposure "lock", and subsequently switch to manual mode to fine-tune exposure.
While the ELB 500 TTL outputs about 10 times the power as a speedlite, it has features that you'd only find on an advanced on-camera flash. The pack is High Speed Sync compatible, for example, allowing you to trigger it at shutter speeds as short as 1/8000 sec to control background brightness, freeze action, or to use wide lens apertures.
These advanced exposure features are backed by solid performance specs. Recycling is a very fast 0.05 to 2 seconds and flash duration is 1/3400 sec in Normal mode. There's also an Action mode with flash durations as short as a lightning-fast 1/20,000 sec - ideal for freezing water spray, splashes, and other effects.
The ELB 500 is powered by a separately sold removable lithium-ion battery that will give you 400 full-power flashes and an impressive 28,000 minimum-power flashes on a full charge. Convenience features include Active Charging, which allows you to charge the battery while shooting with AC power for an uninterrupted workflow. Power, performance, and TTL exposure control make the ELB 500 TTL hard to beat.
Maximum Watt/Seconds
|
500 Ws |
Flash Variability | 7 Stops (in 1/10 increments) |
Recycle Time | 0.05-3.5 sec |
Flash Duration | Action Mode: 1/20,000 sec |
Normal Mode: 1/3400 sec | |
Distribution | Asymmetric |
Head Outlets | 2 |
Battery | Separately sold lithium-ion battery pack (14.4 V/72 Wh) |
Battery Life | 400 full-power flashes |
28,000 minimum-power flashes | |
Dimensions | 6.4 x 5.4 x 3.6" / 16.3 x 13.8 x 9 cm |
With Battery: 6.4 x 7.12 x 3.6" / 16.3 x 18.1 x 9 cm | |
Weight | 3.83 lb / 1.8 kg |
With Battery: 5.5 lb / 2.5 kg | |
Box Dimensions (LxWxH) | 10.0 x 8.5 x 7.0" |
Li-Ion Battery for ELB 500 TTL | |
General
|
|
Charging Time | 1.6 Hours |
Dimensions | 6.4 x 3.6 x 1.9" / 16.26 x 9.14 x 4.83 cm |
Weight | 1.6 lb / 0.7 kg |
Battery | |
Chemistry | Lithium-Ion |
Flashes Per Charge | 400 Flashes (Full Power) |
Packaging Info | |
Box Dimensions (LxWxH) | 9.0 x 7.0 x 5.0" |
Battery Charger for ELB 500 TTL | |
Electrical
|
|
AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 1.5 A |
Number of Battery Bays | 1 |
Packaging Info | |
Box Dimensions (LxWxH) | 8.0 x 7.5 x 2.5" |
ELB 500 TTL Flash Head | |
Maximum Watt/Seconds
|
500 |
Changeable Reflector | Yes, Quadra Mount (Q-Mount) |
Color Temperature | Flash Head: 5500K @ full power (+/-200K over 7 stops) |
Flash Head Power Stability: 0.05% | |
Modeling Light: 5200K @ full power (CRI 90) | |
Flash Duration | Action Mode: 1/20,000 sec |
Normal Mode: 1/3400 sec | |
Cable Length | 8.0' / 2.4 m |
Modeling Light | 14 W LED (50 W halogen equivalent) |
Modes: On/Off, free adjustment, proportional, timer, visual confirmation | |
Control: on ELB 500 TTL pack | |
Fan Cooled | No |
Mount | 5/8" (16 mm) Receiver |
7.0 mm Umbrella fitting | |
Dimensions | 3.5 x 3.1 x 6.3" / 9.0 x 8.0 x 16 cm |
Weight | 1.5 lb / 0.68 kg |
Packaging Info | |
Box Dimensions (LxWxH) | 1.0 x 1.0 x 1.0" |
Snappy Carry Bag with Shoulder Strap for ELB 500 TTL | |
Material of Construction
|
Ballistic nylon |
Carrying Options | Shoulder strap |
Packaging Info | |
Box Dimensions (LxWxH) | 8.1 x 7.9 x 4.8" |
7" (17.8 cm) Grid Reflector for Quadra Heads | |
Packaging Info
|
|
Box Dimensions (LxWxH) | 9.1 x 7.2 x 5.4" |
ProTec Location Bag | |
Exterior
|
|
Closure Type | Zipper |
Carry and Transport Options | Handle |
Shoulder Strap | |
Material of Construction | Nylon |
Exterior Dimensions (W x H x D) | 23.8 x 8.5 x 12.3" / 60.5 x 21.7 x 31.4 cm |
Weight | 6.8 lb / 3.1 kg |
Packaging Info | |
Box Dimensions (LxWxH) | 23.1 x 15.7 x 9.1" |
5.3" (13.5 cm) Standard Reflector for Quadra Flash Head | |
Packaging Info
|
|
Box Dimensions (LxWxH) | 6.6 x 6.4 x 6.2" |
Copyright © Adophoto 2019 All rights reseved